Sawblade Certificate Quiz – 40 Questions
/by Greg LarsonPlease fill out your name, school, and six-digit Membership ID number below before continuing…
Time limit: 0
Quiz Summary
0 of 40 Questions completed
Questions:
Information
You must fill out this field. | |
You must fill out this field. | |
You must fill out this field. |
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Quiz complete. Results are being recorded.
Results
0 of 40 Questions answered correctly
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Average score | |
Your score |
Categories
- Not categorized 0%
Unfortunately, you failed the quiz. You must get at least 80% and 128 points to pass. Please review the material and retake the quiz again when you feel ready.
Congratulations, you passed the quiz! Please print your completion certificate and give it to your instructor and inform them of your score to complete your Sawblade Certification requirements.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- Current
- Review
- Answered
- Correct
- Incorrect
- Question 1 of 40
1. Question
4 point(s)Which of the following is the best tool for squaring a line across a board?
CorrectIncorrect - Question 2 of 40
2. Question
4 point(s)What should the reading be on a properly calibrated caliper when the jaws are touching?
CorrectIncorrect - Question 3 of 40
3. Question
4 point(s)What are calipers used to measure?
CorrectIncorrect - Question 4 of 40
4. Question
4 point(s)Which of the following is a consideration before attempting to rip on a Table Saw?
CorrectIncorrect - Question 5 of 40
5. Question
4 point(s)A dado head cannot cut:
CorrectIncorrect - Question 6 of 40
6. Question
4 point(s)What tool would be used to lay out a 35 degree angle?
CorrectIncorrect - Question 7 of 40
7. Question
4 point(s)Ripping narrow stock on the table saw requires:
CorrectIncorrect - Question 8 of 40
8. Question
4 point(s)The size of a table saw is determined by the:
CorrectIncorrect - Question 9 of 40
9. Question
4 point(s)When using dado cutters on the table saw, the table insert must be replaced with a special:
CorrectIncorrect - Question 10 of 40
10. Question
4 point(s)The blade guard on a band saw should be adjusted__________.
CorrectIncorrect - Question 11 of 40
11. Question
4 point(s)What is the dimension tolerance for Freehand Ripping One Edge on the Band Saw?
CorrectIncorrect - Question 12 of 40
12. Question
4 point(s)A _______________ is used for re-sawing on a band saw.
CorrectIncorrect - Question 13 of 40
13. Question
4 point(s)Describe where the saw guides are located on a band saw:
CorrectIncorrect - Question 14 of 40
14. Question
4 point(s)The ___________ is located behind the blade and prevents the blade from deflecting when the stock is pushed into the blade.
CorrectIncorrect - Question 15 of 40
15. Question
4 point(s)Which of the following is a consideration before milling a board on the Jointer?
CorrectIncorrect - Question 16 of 40
16. Question
4 point(s)To get a 1/16” depth and a 3 degree bevel using the jointer, what needs to be adjusted?
CorrectIncorrect - Question 17 of 40
17. Question
4 point(s)What part of a jointer is kept in a fixed height position for all standard operations?
CorrectIncorrect - Question 18 of 40
18. Question
4 point(s)Jointing against the grain of a board will most likely result in _____________.
CorrectIncorrect - Question 19 of 40
19. Question
4 point(s)When milling rough sawn boards on a single-sided Planer or Surfacer, the machine _______.
CorrectIncorrect - Question 20 of 40
20. Question
4 point(s)Warp in solid stock is removed by a:
CorrectIncorrect - Question 21 of 40
21. Question
4 point(s)Which of the following is a consideration before milling a board on a Planer?
CorrectIncorrect - Question 22 of 40
22. Question
4 point(s)The lower feed rolls on the planer can be set higher to ______________.
CorrectIncorrect - Question 23 of 40
23. Question
4 point(s)Which of the following is a consideration when using a Portable Router?
CorrectIncorrect - Question 24 of 40
24. Question
4 point(s)Changing router bits must only take place when the ___________________.
CorrectIncorrect - Question 25 of 40
25. Question
4 point(s)What is the dimension tolerance for a Rabbet milled with a Portable Router?
CorrectIncorrect - Question 26 of 40
26. Question
4 point(s)If one needed to machine a rabbet on a board and had a straight bit in a portable router, which of the following statements would be correct?
CorrectIncorrect - Question 27 of 40
27. Question
4 point(s)When giving the size of a board, we give the size in a specific sequence; which sequence below is in the correct order?
CorrectIncorrect - Question 28 of 40
28. Question
4 point(s)The function of a pilot or bearing on a router bit is to ___________.
CorrectIncorrectQuestion 29 of 4029. Question
4 point(s)Random Orbit sanders tend to leave ___________.
CorrectIncorrectQuestion 30 of 4030. Question
4 point(s)Which of the following is not used for sandpaper?
CorrectIncorrectQuestion 31 of 4031. Question
4 point(s)Which of the following is a Level 1 performance standard for Portable Hand Sander on solid wood parts?
CorrectIncorrectQuestion 32 of 4032. Question
4 point(s)What is the highest NHLA grade of hardwoods?
CorrectIncorrectQuestion 33 of 4033. Question
4 point(s)Which of the following is the least dimensionally stable?
CorrectIncorrectQuestion 34 of 4034. Question
4 point(s)Hardwood should typically be dried to what moisture content before working with it?
CorrectIncorrectQuestion 35 of 4035. Question
4 point(s)What is the board footage of a 5/4” x 12” x 96” board?
CorrectIncorrectQuestion 36 of 4036. Question
4 point(s)The standard size of plywood in the U.S. is:
CorrectIncorrectQuestion 37 of 4037. Question
4 point(s)What machine will best make 1 edge and 1 surface square and clean?
CorrectIncorrectQuestion 38 of 4038. Question
4 point(s)What machine is used to make two surfaces parallel?
CorrectIncorrectQuestion 39 of 4039. Question
4 point(s)Plain or Flat sawn wood expands the greatest:
CorrectIncorrectQuestion 40 of 4040. Question
4 point(s)What should the typical moisture content be for interior woodwork?
CorrectIncorrect